EWL was designed for use on chain guns and machine guns like the MP5 and the 249SAW. It contains a proprietary Anti wear agent that reduces friction and wear by 90-95%. SLip2000™ EWL is formulated to provide maximum performance in larger guns that may have issues with friction and heat while providing all the benefits of our regular lubricant.
SLip2000™ EWL is a specially formulated synthetic liquid lubricant. Formulated without the use of mineral oil or petroleum distillates SLip2000™ EWL has extremely high penetrating and (EP) anti-wear properties. It also combines three essential functions in a single product. Specifically; Cleaning, Lubrication, and Preservation of handheld weapons, and weapons systems of both large and small caliber. This product will not separate, become sticky or dry out and leave any tacky residue behind. It will not attract and hold firing residue, dust or dirt particles like petroleum products.
SLip2000™ EWL has incorporated advanced technology additives to enhance film strength and anti-wear properties. Penetrating the pores and bonding its self to the surface of the metal through physical absorption reducing surface tension thereby reducing friction between moving parts and minimizing wear and the build-up of wear related debris.
SLip2000™ EWL will not dry out; attract dust or dirt particles like petroleum products. Even when surface is wiped dry to the touch SLip2000™ EWL is still present and lubricating the metal parts from within the pores of the weapon. This product does not require a liquid carrier to be present for protection. SLip2000™ EWL does not evaporate off because there are no carriers needed for continued protection.
SLip2000™ EWL provides additional protection through additives that in addition to the ability to penetrate between metal surfaces, it will also aid in the effective removal of built up dirt, lead, copper, carbon, corrosion particles and firing residues that can buildup and become abrasive to both recoil and gas operated mechanisms.
After cleaning, a micro thin film of our enhanced preservative immediately bonds itself and forms a barrier film on the surface that displaces water and provides a corrosion resistant barrier against rust and dirt. It is designed to give protection against hydrogen sulfide (H2S), mild mineral acids, carbon dioxide (CO2), saltwater and brackish environments, musky water, chlorine and similar adverse environments and has passed the Salt Spray Corrosion (ASTM B-117) 150 Hour test. Additionally a barrier of protection is formed to protect against all other fouling of lead, carbon, copper and plastic wad.
SLip2000™ EWL is formulated to meet the complete requirements of cleaning, lubricating, and preserving both small and large caliber weapons in virtually all climate conditions. Apply to weapons metal surface liberally on first application. Allow to penetrate surface on first application approximately 5 to 10 min. Wipe excess lubricant from surface to leave a dry surface to the touch. This will also help when it comes to dirt not sticking to a dry weapon. As weapons are used and heat up the SLip2000™ will penetrate even deeper into the pores of the metal. On second cleaning these pores will fill in with additional Lubricant and a new protective barrier will be formed making the second cleaning much easier and faster.
SLip2000™ EWL meets most and exceeds requirements of MIL SPEC: MIL-PRF-63460D (6)
Kinematics Viscosity (ASTM D445) -59 F…Pass
Falex Load Carrying Capacity (ASTM D3233) 4500 lbs…Pass
Corrosion Test (ASTM-B-117) 150 Hr…Pass
Rust Resistance (ASTM D-665) Test A…Pass Test B…Pass Modified Test C…Pass
Only logged in customers who have purchased this product may leave a review.
Cleaning & Lubrication
Cleaning & Lubrication